Alpha MED Scientific MED64 MED-C11 Instrukcja obsługi produktu - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi produktu dla Kable i złącza Alpha MED Scientific MED64 MED-C11. Alpha MED Scientific MED64 MED-C11 20 stron. Med multi-well connector

Drukuj stronę

2. Installation

2-1. Connecting the MED Multi-well Connector to the MED64 Head

Amplifier

• Read product manuals for all other components of the MED64-Allegro System prior to installation.

1. Place the MED Multi-well Connector on a stable table and AWAY from any equipment which generates

an electric or magnetic filed (e.g. power supply unit, peristaltic pump, heater, refrigerator, etc.).

2. Connects the 4 output terminals of the MED Multi-well Connector to the INPUT terminals of the MED64

Head Amplifier with the MED Connector Cables. Make sure that the terminals with same numbers

are connected. (e.g. 1-16CH to INPUT 1-16CH).

3. Place all cables AWAY from any equipment that generates and electric or magnetic filed.

•

The MED Connector Cable is very sensitive to noise and vibration. Make sure that the cable

stays away from any equipment that generates electric or magnetic filed, and sits on a stable

table where it cannot be disturbed (i.e. bumped into or displaced during recording).

4. Connects the Ground terminal to the SIGNAL GND in the MED64 Head Amplifier (MED-A64HE1S) with

the green grounding wire to properly ground the Connector.

CAUTION:

Make sure to ground the MED Multi-well Connector to the Head Amplifier. Otherwise considerable exog-

enous noise could be introduced.

Figure 4. Connecting the MED Connector cables (20 pins) to the MED Multi-well Connector.

1-16ch

17-32ch

Figure 5. Connection of the MED Multi-well Connector to the MED64 Head Amplifier (left) and Ground terminal on the

MED Multi-well Connector connected with the grounding wire (right).

33-48ch

49-64ch

Product Manual - MED Multi-well Connector (MED-C11)

2. Installation