Axkid Minikid Podręcznik użytkownika - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Fotelik samochodowy Axkid Minikid. Axkid Minikid 8 stron.

Pull out the band from the retractor (1)

to a suitable length. Check that the white

markings on the bands are visible (2), if not,

try to cross the straps thereby making them

a bit longer so that the white markings are

visible. Attach the interface in the car's or

attachment belt loop. Repeat on the other

side. Wiggle the chair lightly from side to

side a few times.

Fold out the support column (3) to its

outermost position. Pull the latch on the

top height adjuster (3) and pull down the

column so that it makes contact with the

car floor. In case the support column is

not long enough, repeat use of the lower

height adjuster (4). Wiggle the chair from

side to side once again, this time somewhat

stronger. The retractor will then be tensioned

automatically.

If you have installed the car seat in the

car's back seat, move now your vehicle seat

in front of it to a comfortable position. The

back of the car's seat may, but need not, be

in contact with the car seat.

Adjust the seat belt

Place the child in the car seat. Place the

child's arms in between the shoulder straps

so that the straps hang over the baby's chest

and stomach. Assemble the shoulder straps

and fasten them in the seat belt between the

child's legs.

Pull the adjustment belt (5). The belt is

tensioned and the headrest automatically

slides down to the correct height. To loosen

the ties, hold down the belt adjustment

button and pull both belts just below the

cuffs.