Digikeijs DR5033 Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przedłużacz Digikeijs DR5033. Digikeijs DR5033 18 stron. 3-ampere, h-bridge dcc booster
Również dla Digikeijs DR5033: Podręcznik (10 strony), Instrukcja obsługi (18 strony)

Drukuj stronę

DR5033 DIGIBOOST

2.0 product overview

2.1 General product information

The DR5033 is a pure DCC booster capable of Railcom®. All other protocols (e.g. Märklin® Mfx®) are not supported!

The DR5033 is an H-bridge booster with various connection options (CDE booster connection, LocoNet® B, Roco® booster bus, track sniffer) to connect the

DR5033 to an existing central. The configuration of the DR5033 can be customized via LNCV programming. The DR5033 can be configured to switch the polarity

of the track output automatically or by magnetic command. The DR5033 can be switched on and off separately via a magnetic command and the current status

can be queried by the control panel.

Important!

The DR5033 must not be used in systems that operate according to the common ground principle. This can lead to the destruction of the booster

and/or the central unit.

2.2 Technical specifications

The terminals are designed for a cross-section of 0.75mm².

DR5033

www.digikeijs.com

® R-Bus, B-Bus are trademarks which are registered in the name of Modelleisenbahn GmbH. XpressNet and RS-Bus is a trademark registered in the name of Lenz

Stand 2021-07-06

outputs

loading capacity

Track Out

inputs

LocoNet® B

Track Sniffer

Roco® Booster Bus

power supply

15-19V DC

P 4