Digikeijs DR5033 Manual de instrucciones - Página 4
Navegue en línea o descargue pdf Manual de instrucciones para Extensor Digikeijs DR5033. Digikeijs DR5033 18 páginas. 3-ampere, h-bridge dcc booster
También para Digikeijs DR5033: Manual (10 páginas), Manual de instrucciones (18 páginas)
Imprimir página
DR5033 DIGIBOOST
2.0 product overview
2.1 General product information
The DR5033 is a pure DCC booster capable of Railcom®. All other protocols (e.g. Märklin® Mfx®) are not supported!
The DR5033 is an H-bridge booster with various connection options (CDE booster connection, LocoNet® B, Roco® booster bus, track sniffer) to connect the
DR5033 to an existing central. The configuration of the DR5033 can be customized via LNCV programming. The DR5033 can be configured to switch the polarity
of the track output automatically or by magnetic command. The DR5033 can be switched on and off separately via a magnetic command and the current status
can be queried by the control panel.
Important!
The DR5033 must not be used in systems that operate according to the common ground principle. This can lead to the destruction of the booster
and/or the central unit.
2.2 Technical specifications
The terminals are designed for a cross-section of 0.75mm².
DR5033
www.digikeijs.com
® R-Bus, B-Bus are trademarks which are registered in the name of Modelleisenbahn GmbH. XpressNet and RS-Bus is a trademark registered in the name of Lenz
Stand 2021-07-06
outputs
loading capacity
Track Out
inputs
3A
LocoNet® B
Track Sniffer
Roco® Booster Bus
power supply
15-19V DC
3A
P 4