Digikeijs DR5033 사용 설명서 - 페이지 4

{카테고리_이름} Digikeijs DR5033에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digikeijs DR5033 18 페이지. 3-ampere, h-bridge dcc booster
Digikeijs DR5033에 대해서도 마찬가지입니다: 매뉴얼 (10 페이지), 사용 설명서 (18 페이지)

페이지 인쇄

DR5033 DIGIBOOST

2.0 product overview

2.1 General product information

The DR5033 is a pure DCC booster capable of Railcom®. All other protocols (e.g. Märklin® Mfx®) are not supported!

The DR5033 is an H-bridge booster with various connection options (CDE booster connection, LocoNet® B, Roco® booster bus, track sniffer) to connect the

DR5033 to an existing central. The configuration of the DR5033 can be customized via LNCV programming. The DR5033 can be configured to switch the polarity

of the track output automatically or by magnetic command. The DR5033 can be switched on and off separately via a magnetic command and the current status

can be queried by the control panel.

Important!

The DR5033 must not be used in systems that operate according to the common ground principle. This can lead to the destruction of the booster

and/or the central unit.

2.2 Technical specifications

The terminals are designed for a cross-section of 0.75mm².

DR5033

www.digikeijs.com

® R-Bus, B-Bus are trademarks which are registered in the name of Modelleisenbahn GmbH. XpressNet and RS-Bus is a trademark registered in the name of Lenz

Stand 2021-07-06

outputs

loading capacity

Track Out

inputs

LocoNet® B

Track Sniffer

Roco® Booster Bus

power supply

15-19V DC

P 4