Cisco 3825 Series Niezastrzeżona polityka bezpieczeństwa - Strona 14

Przeglądaj online lub pobierz pdf Niezastrzeżona polityka bezpieczeństwa dla Router sieciowy Cisco 3825 Series. Cisco 3825 Series 30 stron. Integrated services routers
Również dla Cisco 3825 Series: Instalacja i aktualizacje (20 strony), Skrócona instrukcja obsługi (38 strony), Skrócona instrukcja obsługi (40 strony)

Cisco 3825 and Cisco 3845 Routers

Tamper evidence label B shall be placed so that one half of the label covers the bottom of the front panel

Step 3

and the CF card and the other half covers the enclosure.

Tamper evidence labels C and D should be placed so that the one half of the label covers the enclosure

Step 4

and the other half covers the left and right upper ENM slots.

Tamper evidence label E should be placed so that the one half of the label covers the lower right ENM

Step 5

slot and the other half covers the enclosure.

Tamper evidence label F should be placed so that the one half of the label covers the left upper and lower

Step 6

HWIC slots and the other half covers the enclosure.

Tamper evidence label G should be placed so that the one half of the label covers the right upper and

Step 7

lower HWIC slots and the other half covers the enclosure.

Allow the labels five minutes to completely cure.

Step 8

Figure 7

Figure 8

To apply serialized tamper-evidence labels to the Cisco 3845:

Clean the cover of any grease, dirt, or oil before applying the tamper evidence labels. Alcohol-based

Step 1

cleaning pads are recommended for this purpose. The temperature of the router should be above 10 C.

Tamper evidence labels A and B should be placed so that one half of the label covers the front panel and

Step 2

the other half covers the enclosure.

Tamper evidence label C should be placed so that one half of the label covers the left upper and lower

Step 3

ENM modules and the other half covers the enclosure.

Tamper evidence labels D and E should be placed so that one half of each label covers the side of right

Step 4

ENM modules and the other half covers the enclosure.

Cisco 3825 and Cisco 3845 Integrated Services Routers FIPS 140-2 Non Proprietary Security Policy

and

Figure 8

show the tamper evidence label placements for the Cisco 3825.

Cisco 3825 Tamper Evident Label Placement (Front View)

Cisco 3825 Tamper Evident Label Placement (Back View)

OL-8662-01