Cisco 3825 Series Política de segurança não proprietária - Página 14
Procurar online ou descarregar pdf Política de segurança não proprietária para Router de rede Cisco 3825 Series. Cisco 3825 Series 30 páginas. Integrated services routers
Também para Cisco 3825 Series: Instalação e actualizações (20 páginas), Manual de início rápido (38 páginas), Manual de início rápido (40 páginas)
Imprimir página
Cisco 3825 and Cisco 3845 Routers
Tamper evidence label B shall be placed so that one half of the label covers the bottom of the front panel
Step 3
and the CF card and the other half covers the enclosure.
Tamper evidence labels C and D should be placed so that the one half of the label covers the enclosure
Step 4
and the other half covers the left and right upper ENM slots.
Tamper evidence label E should be placed so that the one half of the label covers the lower right ENM
Step 5
slot and the other half covers the enclosure.
Tamper evidence label F should be placed so that the one half of the label covers the left upper and lower
Step 6
HWIC slots and the other half covers the enclosure.
Tamper evidence label G should be placed so that the one half of the label covers the right upper and
Step 7
lower HWIC slots and the other half covers the enclosure.
Allow the labels five minutes to completely cure.
Step 8
Figure 7
Figure 7
Figure 8
To apply serialized tamper-evidence labels to the Cisco 3845:
Clean the cover of any grease, dirt, or oil before applying the tamper evidence labels. Alcohol-based
Step 1
cleaning pads are recommended for this purpose. The temperature of the router should be above 10 C.
Tamper evidence labels A and B should be placed so that one half of the label covers the front panel and
Step 2
the other half covers the enclosure.
Tamper evidence label C should be placed so that one half of the label covers the left upper and lower
Step 3
ENM modules and the other half covers the enclosure.
Tamper evidence labels D and E should be placed so that one half of each label covers the side of right
Step 4
ENM modules and the other half covers the enclosure.
Cisco 3825 and Cisco 3845 Integrated Services Routers FIPS 140-2 Non Proprietary Security Policy
14
and
Figure 8
show the tamper evidence label placements for the Cisco 3825.
Cisco 3825 Tamper Evident Label Placement (Front View)
Cisco 3825 Tamper Evident Label Placement (Back View)
OL-8662-01