Cisco TelePresence SpeakerTrack 60 Instrukcja obsługi kamery - Strona 23
Przeglądaj online lub pobierz pdf Instrukcja obsługi kamery dla System konferencyjny Cisco TelePresence SpeakerTrack 60. Cisco TelePresence SpeakerTrack 60 40 stron. Telepresence
Również dla Cisco TelePresence SpeakerTrack 60: Arkusz danych (3 strony), Instrukcja instalacji (19 strony), Instrukcja instalacji (14 strony), Podręcznik (22 strony), Instrukcja obsługi kamery (44 strony)
Drukuj stronę
Cisco Quad Camera, Precision 60, SpeakerTrack 60 and PTZ-12 Camera
Contents
Connect SpeakerTrack 60 to Codec C90
•
Connect the video cables (HDMI).
Left camera: Connect between Connector 1 (HDMI input) on the
codec to the HDMI input of the left camera.
Right camera: Connect between Connector 2 (HDMI input) on the
codec to the HDMI input of the right camera.
•
Connect the camera control cable (Ethernet). Connect between
the codec's 2nd Ethernet port and the Network port (Ethernet) on
the SpeakerTrack 60 connector panel.
•
Connect the power adapter to the SpeakerTrack 60 connector
panel and connect to power.
•
Connect other codec cables as described in
Telepresence Codec C90 installation
HDMI 1
HDMI 2
D15296.10 Cisco Quad Camera, Precision 60, SpeakerTrack 60, and PTZ-12 Camera SEPTEMBER 2019.
Introduction
Physical interface
theCisco
guide.
RJ45
Power
(100-240 V
AC
Connecting to a codec
Connecting to a codec
When using a SpeakerTrack 60 with a C Series codec, the
codec cannot be controlled with the TRC5 (Cisco Remote
Control). Instead, a Cisco TelePresence Touch 8 user interface
or an external control device must be used.
Right
Power
adapter
Always use the provided power
, 50/60 Hz)
cable and adapter.
23
Factory reset
Appendix
Left
Copyright © 2019 Cisco Systems, Inc. All rights reserved.
Camera guide