Cisco TelePresence SpeakerTrack 60 Instrukcja obsługi kamery - Strona 24

Przeglądaj online lub pobierz pdf Instrukcja obsługi kamery dla System konferencyjny Cisco TelePresence SpeakerTrack 60. Cisco TelePresence SpeakerTrack 60 40 stron. Telepresence
Również dla Cisco TelePresence SpeakerTrack 60: Arkusz danych (3 strony), Instrukcja instalacji (19 strony), Instrukcja instalacji (14 strony), Podręcznik (22 strony), Instrukcja obsługi kamery (44 strony)

Drukuj stronę
Cisco TelePresence SpeakerTrack 60 Instrukcja obsługi kamery
Cisco Quad Camera, Precision 60, SpeakerTrack 60 and PTZ-12 Camera
Contents

Connect PTZ-12 to Codec Plus

•
Connect the video cable (HDMI) between the camera and codec.
Codec: Always use Connector 1 (HDMI input) for the main camera.
Camera: Connect to the HDMI output.
•
Connect the camera control cable (Ethernet) between the camera
control ports on the camera and codec.
Codec: The connector is marked with the camera control symbol.
Camera: Connect to the Ethernet port.
•
Connect the power adapter to the camera and connect to power.
•
Connect other codec cables as described in
Room Kit Plus PTZ-12 installation
guide.
RJ45
D15296.10 Cisco Quad Camera, Precision 60, SpeakerTrack 60, and PTZ-12 Camera SEPTEMBER 2019.
Introduction
Physical interface
theCisco Webex
HDMI
Connecting to a codec
Connecting to a codec
Power
(100-240 V
, 50/60 Hz)
AC
24
Factory reset
Power
adapter
Always use the provided power cable
and adapter.
Copyright © 2019 Cisco Systems, Inc. All rights reserved.
Camera guide
Appendix