Cisco IAD2430 Series Skrócona instrukcja obsługi - Strona 25
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt sieciowy Cisco IAD2430 Series. Cisco IAD2430 Series 34 stron. Integrated access device
Również dla Cisco IAD2430 Series: Podręcznik przeglądowy (13 strony), Przegląd (16 strony)
Drukuj stronę
Figure 26
Tightening the Velcro Strap
10
Powering On the Cisco IAD
This section provides the procedure for powering on your Cisco IAD2430 router.
Do not use AC and DC power at the same time. If you do, the unit stops operating, and you must reboot it with
Caution
only a single power source.
Checklist for Power-On
You can power on the Cisco IAD2430 series IADs if it meets these requirements:
• The chassis is securely mounted.
• Power and interface cables are connected.
Power-On Procedure
Perform this procedure to power on your Cisco IAD2430 series IADs and verify that it completes its initialization and self-test.
To power on the Cisco IAD, follow these steps:
Step 1
Power on your terminal or PC, and configure it for 9600 bps, 8 data bits, 1 stop bit, and no parity.
Move the Cisco IAD power switch to the ON position (Cisco IAD2430 through Cisco IAD2432 IADs only).
Step 2
The green LED next to the auxiliary (AUX) port should come on and the fan should operate. If this does not happen,
see the power-on procedure in the Cisco IAD2430 Series Integrated Access Device Hardware Installation Guide.
For the Cisco IAD2435 IAD, plug in the external power supply (see Figure 24).
F X S
IA D 2 4 3 5 -
W A N
F a st E th e rn
T 1 /E 1
0 /1
8 F X S
e t
0 /0
25