Cisco UCS E Series Instrukcja instalacji - Strona 40
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Serwer Cisco UCS E Series. Cisco UCS E Series 46 stron. Ucs e series unified computing system
Również dla Cisco UCS E Series: Przegląd produktów (8 strony), Instrukcja rozwiązywania problemów (28 strony)
Drukuj stronę
Installing and Replacing the Memory DIMMS
The following figure shows the location of the memory DIMMs in a double-wide E-Series Server.
The double-wide E-Series Servers support up to 48 GB of DDR3 memory DIMMs.
Note
Figure 19
Memory DIMM Location in a Double-Wide E-Series Server
Node0_Dimm1
Node0_Dimm0
Removing the Memory DIMM
Procedure
Connect your wrist-strap clip to an unpainted portion of the chassis frame to channel unwanted ESD
Step 1
voltages to ground.
Turn off power to the router.
Step 2
Note
Locate the DIMM on the E-Series Server. See the
Step 3
Hardware Installation Guide for Cisco UCS E-Series Servers
40
Node0_Dimm2
Alternatively, the Cisco 3900 ISR G2 and the Cisco ISR 4451-X support OIR. See the
Insertion and Removal" section on page
29.
"Memory DIMM Location" section on page
"Online
39.
OL-26447-03