Cisco ATA 186 Podręcznik użytkownika - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Gateway Cisco ATA 186. Cisco ATA 186 12 stron. Analog telephone adaptor
Również dla Cisco ATA 186: Konfiguracja (28 strony), Arkusz danych (7 strony), Przegląd (11 strony), Podręcznik przeglądowy (11 strony), Podręcznik konfiguracji (8 strony), Instrukcja instalacji i konfiguracji (13 strony), Instrukcje dotyczące instalacji (6 strony), Konfiguracja (6 strony)

About the Cisco ATA 186

Additional Feature

Cisco ATA 186 Installation and Configuration Guide

1-3

Dual RJ-11 Ports

•

–

Supports two independent RJ-11 telephone ports that can connect to any

standard analog telephone device. Each port supports either voice calls

or FAX sessions, so that the user can talk on one port while sending a

FAX on the other.

There are two RJ-11 FXS port terminating impedance options, 600 Ohms

–

resistive or 270 Ohms + 750 Ohms // 150 nF complex impedance. The

impedance of the Cisco ATA 186 depends on the option ordered and must

match the particular application. If you are not sure of the applicable

configuration, check the country or regional telephone impedance

requirements.

Indicators

•

–

Function Button

The Cisco ATA 186 function button is located in the top panel of the

device. The function button lights when you pick up the handset of a

telephone attached to the Cisco ATA 186. When the function button

blinks, the device is in configuration search or upgrade mode. You also

use the function button to access the interactive voice response (IVR)

configuration menu. To configure the Cisco ATA 186 by using the IVR

mode, see

Chapter 3, "Configuring the Cisco ATA 186."

Activity LED

–

The green Activity LED located on the back panel flashes to indicate

network activity.

5 Volt power adapter connector (adapter included)

•

10Base-T Ethernet port

•

Supports polarity reversal before and after caller-ID signal.

Chapter 1

Cisco ATA 186 Overview

OL-1267-01