Ariston AWD 121 Instrukcja naprawy - Strona 13
Przeglądaj online lub pobierz pdf Instrukcja naprawy dla Spryskiwacz Ariston AWD 121. Ariston AWD 121 20 stron. Washer / washer-dryer combo
Również dla Ariston AWD 121: Instrukcje użytkownika (21 strony), Instrukcja instalacji i użytkowania (17 strony)
Drukuj stronę
- 1. Table of Contents
- 2. Model & Serial Number Locations
- 3. Top Panel
- 4. Control Panel
- 5. Control Panel Components
- 6. Toe Kick & Drain Motor
- 7. Drum Boot
- 8. Door Switch
- 9. Water Valves
- 10. Heater Assembly (AWD 120 / 121 / 129 Only)
- 11. Pressure Switch
- 12. Rear Access Panel
- 13. Control Board
- 14. Main Motor
- 15. Fault Codes
- 16. Schematics
10. PRESSURE SWITCH
11. REAR ACCESS PANEL
• To remove the Rear Access Panel, remove the seven (7) Phillips screws (Fig. 11-1). With the Rear Access Panel removed you
have access to the following components (Fig. 11-2); Water Temperature NTC (A), Main Motor & Belt (B), Drain Hose (C) and
Control Board (D).
REPAIR MANUAL
• To remove the Pressure Switch, first remove the Top Panel as described in Section 2,
then push in on the center support of the Pressure Switch Bracket and slide the Pressure
Switch up and off (Fig. 10-1).
Do not attempt to calibrate the Pressure Switch, replace as a complete assembly.
TECH NOTE: Pressure Switch wiring and function:
Fig. 10-1
Fig. 11-1
Contact 11. Common (BL)
Contact 12. Empty (BR)
Contact 14. Full (W)
Contact 16. Overfill (BK)
C
D
AW 120 / AW 122 / AW 125
AWD 120 / AWD 121 / AWD 129
A
B
Fig. 11-2
Page: 10