Ariston AWD 121 Instrukcja naprawy - Strona 15
Przeglądaj online lub pobierz pdf Instrukcja naprawy dla Spryskiwacz Ariston AWD 121. Ariston AWD 121 20 stron. Washer / washer-dryer combo
Również dla Ariston AWD 121: Instrukcje użytkownika (21 strony), Instrukcja instalacji i użytkowania (17 strony)
Drukuj stronę
- 1. Table of Contents
- 2. Model & Serial Number Locations
- 3. Top Panel
- 4. Control Panel
- 5. Control Panel Components
- 6. Toe Kick & Drain Motor
- 7. Drum Boot
- 8. Door Switch
- 9. Water Valves
- 10. Heater Assembly (AWD 120 / 121 / 129 Only)
- 11. Pressure Switch
- 12. Rear Access Panel
- 13. Control Board
- 14. Main Motor
- 15. Fault Codes
- 16. Schematics
13. MAIN MOTOR
• To remove the Main Motor, first remove the Drive Belt and then the two (2) 13 mm Motor Mounting Plate Bolts (Fig. 13-1). The
Main Motor has three support points, two in the front (A) and a third located on a Rear Mounting Bracket that supports the Motor on
the rear left side (Fig. 13-2). Brace the Motor as you remove the two Mounting Plate Bolts, when both bolts are clear bring the
Motor out toward you freeing it from the rear support (Fig. 13-3). Remove the two (2) 8mm Bolts that attach the Plate to the Motor.
REPAIR MANUAL
A
Fig. 13-2
AW 120 / AW 122 / AW 125
AWD 120 / AWD 121 / AWD 129
A
Fig. 13-1
Fig. 13-3
Page: 12