ERGO-INNOVATE EI6121 Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Stojaki i stojaki ERGO-INNOVATE EI6121. ERGO-INNOVATE EI6121 12 stron. Tv wall mount

3B-1

3B-2

3B-3

3B-4

Position arm assembly/wall plate [03] at

your desired height, level the wall arm

assembly/wall plate [03] and mark the

pilot hole locations.

Drill 2 pilot holes using a 3/8 in.(10mm)

diameter drill bit. Make sure the depth is

not less than 2 9/16 in.(65mm). Never

drill into the mortar between blocks.

Use the hammer to knock anchors

[A2] into the wall. Be sure the

anchors [A2] are seated ﬂush with

the concrete surface.

Install wall plate using lag screws

[A1] and anchors [A2]. Tighten the

lag screws [A1] only until they are

pulled ﬁrmly against the wall plate.

DO NOT over-tighten the lag

screws [A1].

2 9/16 in.(65mm)

ø3/8 in.(10mm)

25/64 in.(10 mm)

Socket Wrench