ERGO-INNOVATE EI6121 Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Stojaki i stojaki ERGO-INNOVATE EI6121. ERGO-INNOVATE EI6121 12 stron. Tv wall mount

Option D

For cable interference or inset holes, use

spacers

to create extre space between the

TV and faceplate(or faceplate with extender)

)bracket.

Alternate Spacer Setups

Step 3 Attach the Arm Assembly/Wall Plate [03] to Wall

For wood stud installation, follow STEP 2A

For concrete installation, follow STEP 2B

Step 3A Wood Stud Option

WARNING:

●Avoid potential personal injury or property damage! DO NOT over-tighten the

lag screws [A1]. Tighten the lag screws [A1] only until the they are pulled ﬁrmly

against the arm assembly/wall plate [03].

●DONOT USE ANCHOR [A2] FOR THIS STEP!

●Ensure the arm assembly/wall plate [03] is securely fastened to

the wall before continuing to the next step.

● Any material covering the wall must not exceed 5/8 in. (16 mm)

● Nominal wood stud size: common 2 x 4 in. (51 x 102 mm) minimum 1½ x

3½ in. (38 x 89 mm)

● Stud center must be veriﬁed

3A-1

Use a stud ﬁnder(not included) to

locate wood studs or use an awl (not

included) to verify the edges. Mark the

edge and center locations.

C1/C2

D2/D4/D6

B1/B2

Awl

(Not lncluded)