ERGO-INNOVATE EI6121 Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Stojaki i stojaki ERGO-INNOVATE EI6121. ERGO-INNOVATE EI6121 12 stron. Tv wall mount

3A-2

3A-3

3A-4

Step 3B Solid Concrete or Concrete Block Option

WARNING:

●Avoid potential personal injury or property damage! DO NOT over-tighten the lag screws

[A1]. Tighten the lag screws [A1] only until they are pulled ﬁrmly against the wall plate.

●Ensure the wall plate is securely fastened to the wall before

continuing to the next step.

● Any material covering the wall must not exceed 5/8 in. (16 mm)

● Mount

the wall plate

● Minimum solid concrete thickness: 203 mm (8 in.)

● Minimum concrete block size: 203 x 203 x 406 mm (8 x 8 x 16 in.)

● Never drill into the mortar between blocks

Position the arm assembly/wall plate [03] at

your desired height and line up the holes with

your stud center line. Level the

assembly/wall plate [03]

Drill 2 pilot holes using a 5/32 in.(4 mm)

diameter drill bit. Make sure the depth is

not less than 2 23/64 in.(60mm).

Install the arm assembly/wall plate [03] using

lag screws [A1] . Tighten the lag screws [A1]

only until the they are pulled ﬁrmly against the

arm assembly/wall plate [03].

directly onto the concrete surface

arm

and mark the holes.

2 23/64 in.(60mm)

ø5/32 in.(4mm)

25/64 in.(10 mm)

Socket Wrench

Wall

Anchor