Blackberry Radar H2 Instrukcja instalacji - Strona 16

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Radar Blackberry Radar H2. Blackberry Radar H2 30 stron. Dry van, insulated trailers roll-up doors
Również dla Blackberry Radar H2: Instrukcja instalacji (33 strony), Instrukcja instalacji (26 strony), Instrukcja instalacji (25 strony), Instrukcja instalacji (32 strony), Instrukcja instalacji (33 strony), Instrukcja instalacji (34 strony), Instrukcja instalacji (35 strony), Instrukcja obsługi (33 strony), Instrukcja instalacji (32 strony), Instrukcja instalacji (26 strony), Instrukcja instalacji (25 strony), Instrukcja instalacji (28 strony)

BLACKBERRY RADAR H2 ITC100-1 INSTALLATION GUIDE

3.4 Module installation

You may install the module on any flat, vertical or horizontal surface that offers enough

mounting area for the module. When selecting a mounting location, carefully consider how

the asset will be used during its normal, day-to-day operation.

Do not place the module in a location where it is susceptible to damage from:

Normal usage activities, such as loading or unloading cargo.

•

Moving parts of the asset.

•

Road debris.

•

IMPORTANT: For accurate tracking, orientation matters.

1. You may install the device horizontally or vertically.

NOTE: Door open/close detection is only supported when device is

installed horizontally on the asset door.

2. When mounting on a vertical surface, always ensure the device is

installed with the triangle for your desired orientation, pointing up.

3. Full 360° rotation around vertical axis are supported. This allows you

to mount the device on the rear, front, and side surfaces of the asset.

4. You may also rotate the device 90 degrees along the horizontal axis,

and mount on an upward facing surface of the asset, with a clear view

to the sky. This is helpful for installing on roofs, fender surfaces, etc.

5. Do not install the device on the asset with the front of the device

facing the ground. This will result in reduced product performance.

This diagram illustrates the supported installation orientations for the BlackBerry Radar H2

module.