Blackberry Radar H2 Installatiehandleiding - Pagina 16

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Blackberry Radar H2. Blackberry Radar H2 30 pagina's. Dry van, insulated trailers roll-up doors
Ook voor Blackberry Radar H2: Installatiehandleiding (33 pagina's), Installatiehandleiding (26 pagina's), Installatiehandleiding (25 pagina's), Installatiehandleiding (32 pagina's), Installatiehandleiding (33 pagina's), Installatiehandleiding (34 pagina's), Installatiehandleiding (35 pagina's), Gebruiksaanwijzing (33 pagina's), Installatiehandleiding (32 pagina's), Installatiehandleiding (26 pagina's), Installatiehandleiding (25 pagina's), Installatiehandleiding (28 pagina's)

Blackberry Radar H2 Installatiehandleiding
16
BLACKBERRY RADAR H2 ITC100-1 INSTALLATION GUIDE

3.4 Module installation

You may install the module on any flat, vertical or horizontal surface that offers enough
mounting area for the module. When selecting a mounting location, carefully consider how
the asset will be used during its normal, day-to-day operation.
Do not place the module in a location where it is susceptible to damage from:
Normal usage activities, such as loading or unloading cargo.
Moving parts of the asset.
Road debris.
IMPORTANT: For accurate tracking, orientation matters.
1. You may install the device horizontally or vertically.
NOTE: Door open/close detection is only supported when device is
installed horizontally on the asset door.
2. When mounting on a vertical surface, always ensure the device is
installed with the triangle for your desired orientation, pointing up.
3. Full 360° rotation around vertical axis are supported. This allows you
to mount the device on the rear, front, and side surfaces of the asset.
4. You may also rotate the device 90 degrees along the horizontal axis,
and mount on an upward facing surface of the asset, with a clear view
to the sky. This is helpful for installing on roofs, fender surfaces, etc.
5. Do not install the device on the asset with the front of the device
facing the ground. This will result in reduced product performance.
This diagram illustrates the supported installation orientations for the BlackBerry Radar H2
module.