Blackberry Radar H2 Installatiehandleiding - Pagina 17

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Blackberry Radar H2. Blackberry Radar H2 30 pagina's. Dry van, insulated trailers roll-up doors
Ook voor Blackberry Radar H2: Installatiehandleiding (33 pagina's), Installatiehandleiding (26 pagina's), Installatiehandleiding (25 pagina's), Installatiehandleiding (32 pagina's), Installatiehandleiding (33 pagina's), Installatiehandleiding (34 pagina's), Installatiehandleiding (35 pagina's), Gebruiksaanwijzing (33 pagina's), Installatiehandleiding (32 pagina's), Installatiehandleiding (26 pagina's), Installatiehandleiding (25 pagina's), Installatiehandleiding (28 pagina's)

3.4.1 Prepare module for installation—Battery connection

1. Remove the module from the package and from the plastic bag. Detach the fastener

bag from the end of the module and keep nearby. You will require these screws to

complete the module assembly process.

2. Turning the module bottom side up, grasp the end of the module's inner housing. Pull

to separate the inner housing from the outer housing.

3. Remove the battery connector from the connector recess and connect the battery

cable to the battery connector. The LED will blink to indicate the module is active.

NOTE: It can take between 10-15 seconds for the blink sequence to begin. Please be

patient. Once you see the LED blink, you may continue to the next step.

BLACKBERRY RADAR H2 ITC100-1 INSTALLATION GUIDE 17

LED