Clarke EZ-8 Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Maszyna podłogowa Clarke EZ-8. Clarke EZ-8 20 stron. Drum sander
Również dla Clarke EZ-8: Obsługa i bezpieczeństwo (2 strony)

Drukuj stronę

Sander Adjustment Procedures

DANGER:

Electrocution could occur if main-

tenance and repairs are performed

on a unit that is not properly dis-

connected from the power source.

Disconnect the power supply be-

fore attempting any maintenance

or service.

DANGER:

Moving parts of this machine can

cause serious injury and/or dam-

age. Keep hands, feet and loose

clothing away from all moving parts

of the sander.

The following information provides details on how to

adjust different features/controls of the sander.

Dust Shoe

To adjust the dust shoe follow this procedure:

1. Disconnect machine from power supply.

2. Loosen the four screws fastening the dust shoe to

the chassis.

3. Adjust the dust shoe towards the drum to improve

recovery of fine particles.

4. Adjust the dust shoe away from the drum to

improve recovery of coarse particles.

5. Align the dust shoe with the drum and tighten

screws. See figure # 10.

Leveling

To adjust the machine leveling follow this procedure:

1. Locate the leveling screw. See figure # 11.

2. Tighten the screw (compress the leveling spring)

to sand heavier on drive belt side of sanding drum.

3. Loosen the leveling screw (relax the leveling

spring) to sand heavier on the side opposite the

drive belts.

Page 10

Figure # 10

Figure # 11

American Sanders EZ - 8 Sander Operator's Manual

Clarke