Discount Car Stereo A2DIY-CR12 Skrócona instrukcja instalacji - Strona 2
Przeglądaj online lub pobierz pdf Skrócona instrukcja instalacji dla Adapter Discount Car Stereo A2DIY-CR12. Discount Car Stereo A2DIY-CR12 6 stron. For porsche cr-1& cr-2 radios
Drukuj stronęIntroduction:
Just because you drive an older car does not mean you have to settle
for old technology. And
for those who are adamant about hanging on
to the original radio we offer a line of adapters sure to open up a
whole lot of different options for listening to music and other audio
content.
The A2DIY-CR12 Kit offers Bluetooth Hands-Free and
Streaming Audio from any Smartphone or Tablet with A2DP and
HF Profile, a 3.5mm input jack to connect and play non-Bluetooth
devices (e.g. Mp3 Players, Satellite Radio kit, iPods etc.) and optional
3Amp USB Charging port to keep devices fully charged. The
A2DIY-CR12 is exclusive to Porsche 911, 944, 964, 968, 993 and
others with a CR-1 or CR-2 Cassette Radio and replaces the CD
Changer (if
present).
Keep the radio and car you love while
enjoying Bluetooth features only available on newer cars.
Installation:
1. Remove radio from dash.
instructions are not part of this guide.
2. Locate 13-pin CD Changer port on Radio (See Fig. 1)
CD Changer (if present) must be disconnected and will no
longer function.
3. Connect 13-pin plug from adapter (See Fig. 2) to 13-pin
connector on radio (See Fig. 1)
Vehicle specific Radio removal
Radios CD Changer port
Fig. 2
Adapter plug
4. Connect supplied 3.5mm plug (See Fig. 3) to "AUX" input
on Module (See Fig. 6). Run other end to dash or wherever
auxiliary device will reside (within 3 ft.)
Fig. 3
3 ft. Aux cable
5. Connect control button (See Fig. 4) 3.5mm plug to "CTR"
Fig. 1