3Dlabs X400 Skrócona instrukcja obsługi - Strona 14

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Drukarki 3D 3Dlabs X400. 3Dlabs X400 16 stron.

STARTING YOUR FIRST 3D PRINT

There are 2 included files you can print on the X400 by default. We recommend using the file called

"first print", as it prints within an hour. These files are sliced for ABS/ASA material, so do not attempt to

print them with your own PLA material. Only use the material that came with the printer.

1) Use the purple glue stick to apply a cross hatch pattern to the center of the print bed. Try to evenly

cover an area of about 6" x 6".

2) 1-2 layers of glue is all that is needed. Do not apply more.

3) Click the "Files" button

4) Select the "First Print" file and click Print

Page | 14