ClipperCreek CS EVSE Pedestal Instrukcja instalacji - Strona 13
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Stojaki i stojaki ClipperCreek CS EVSE Pedestal. ClipperCreek CS EVSE Pedestal 20 stron. Electric vehicle supply equipment
Drukuj stronęINITIAL PEDESTAL INSTALLATION (continued)
7..Re-install.the.Pedestal.Post.Cap
A pedestal cap is provided to cover the opening to
protect the conductors and inner pedestal from the
elements. Install the appropriate pedestal cap for a
single or dual-mount EVSE installation.
For.Single-Mount.EVSE.Installations:
•
Single-mount EVSE installations utilize the
standard post cap provided in the pedestal kit.
This post cap includes a flange on one side.
Place the post cap onto the top of the pedestal,
with the flange facing the rear.
•
Align the screw hole on each side of the post
cap with the corresponding threaded insert on
the side of the pedestal.
•
Place a 1/4" Neoprene-bonded sealing washer
around the shaft of two (2) 1/4"- 20 x 1" Torx
button-head screws. The metal portion of the
washer should face the head of the screw
while the neoprene should face the tip of the
screw.
•
Secure the cap to the pedestal with the two (2)
1/4"- 20 x 1" Torx button-head screws (with
washers) using T27 Torx driver.
For.Dual-Mount.EVSE.Installations:
•
Dual-mount EVSE installations utilize a
replacement post cap provided in the
Dual-Mount Kit. This post cap lacks a flange
at the rear. Place the post cap onto the top of
the pedestal.
•
Align the screw hole on each side of the post
cap with the corresponding threaded insert on
the side of the pedestal.
•
Place the 1/4" Neoprene-bonded sealing
washer around the shaft of two (2) 1/4"- 20 x 1"
Torx button-head screws. The metal portion of
the washer should face the head of the screw
while the neoprene should face the tip of the
screw.
•
Secure the cap of the two (2) 1/4"- 20 x 1"
Torx button-head screws (with washers) using
a T27 Torx driver.
CS EVSE PEDESTAL INSTALLATION GUIDE
Figure.11:.The.Pedestal.Post.Cap
Page 13
ClipperCreek
The standard post cap has
a.flange.on.the.rear.of.the.
cap..This.flange.faces.the.
back side
of.the.post..
The replacement post cap
in.the.Dual-Mount.Kit.
deletes.the.flange.on.the.
back side to accomodate
a second EVSE mounting
plate..
, Inc.