CANTO 2000 Manual de instruções - Página 3
Procurar online ou descarregar pdf Manual de instruções para Destaque CANTO 2000. CANTO 2000 11 páginas. Follow spotlight metal halide and tungsten-halogen
Imprimir página
THE CANTO FOLLOW SPOTLIGHT is manufactured in Italy by Luci della Ribalta and
imported and marketed in the United States by Strong Entertainment Lighting. The metal halide Canto
models are available in 575, 700, and 1200 watt models, and require use of a separate power supply unit of
the correct wattage. Each power supply operates from a 120 volt, 15 ampere AC line. Tungsten-halogen
models, using either a 1000 watt FEL or 2000 watt GAE bulb, operate from a 120 volt AC line (20 ampere
service required for 2000 watt model). Each unit is supplied complete with a lamphouse, optical system,
yoke, and 1-1/8" (28mm) spigot/truss pin. The metal halide power supply is included as required. A tripod
floor stand and a five-color boomerang are available as optional accessories.
BULBS and color gels are available from theatrical supply distributors. Rated hours or
warranted life of the bulb will vary by type and wattage, and should be noted at installation. It is
generally recommended to keep a spare replacement bulb on hand. Bulbs from manufacturers other
than those listed on Page 5 must be certified by their manufacturer as being 100% interchangeable.
IMPORTANT SAFETY PRECAUTIONS
• This product operates at high temperatures. Avoid any direct contact with its metallic parts.
• WARNING: high voltage ignition cycle.
• UV Rays: the lamps used on the metal halide models (Canto 575, 700 and 1200) emit UV rays. Protect
your eyes and never look directly at the source of light without appropriate eye protection.
• This product requires forced-air ventilation. Make sure you do not cover the fan or obstruct the air
flow at any time.
• Make sure the fan is working correctly. Should you detect even the slightest malfunctioning, switch
the spotlight off and carry out the necessary servicing. Replace the fan if necessary.
• This product is designed for indoor use only. For details on maximum ambient temperature, minimum
distance from flammable objects, and tilt angle, please refer to the data plate.
• Replace the bulb, the mirror and the lenses if damaged or deformed by heat. Make sure the lamp is
cold before attempting to remove it. To correctly install the lamp, please refer to the lamp manufacturer's
instructions included in the lamp box and to the relevant section in this manual.
• Repair and replacement of any component of this product must be carried out exclusively by trained
personnel in compliance with the relevant safety and health standards, and using only original factory
components.
• Replacement of any part of the wiring system must be carried out exclusively by trained personnel in
compliance with the original wiring diagram and using components identical to or compatible with
those originally fitted.
• Installation of this product must be performed exclusively by trained personnel in compliance with the
codes and safety standards in force in the region where the product is used.
PREFACE
1