ANDalyze AND1100 Manual do utilizador - Página 7

Procurar online ou descarregar pdf Manual do utilizador para Instrumentos de medição ANDalyze AND1100. ANDalyze AND1100 16 páginas. Fluorimeter for water testing

Imprimir página

AND1100 Fluorimeter for Water Testing

4.2 Home Testing Screen

Options can be accessed by:

‐

Using the up/down buttons and pressing SELECT button when the arrow is to the left of the desired option.

‐

OR by pressing the button located just below the screen under the desired options at bottom.

Selectable Options:

1) Sensor ‐ Selects which Sensor will be tested.

2) Site ‐ Uses site specific calibrations for accurate tests.

3) Start ‐ To begin a test of the indicated metal.

4) Menu ‐ To change or view internal settings.

4.3 Sensor Screen

4.4 Site Screen

Selecting the Site option allows the user to change or create new sites.

Sites are important because each water sample contains differences

which affect testing results. It is recommended that each location is

calibrated. So by selecting a site, this calibration can be used repeatedly.

Please see section 5 below for further instructions on setting up and calibrating sites.

4.5 Start Option

Depending on your Options settings,

pressing the Start button will either

start the testing instructions OR, if

turned OFF, will begin the testing

immediately (for advanced users).

ANDalyze Inc. 800 Boylston Street, Prudential Tower, Floor 16, Boston, MA 02199 USA Tel. +1 857.453.6740 www.andalyze.com

Selecting the Sensor option allows the user to change the sensor

which the meter will detect.

Once selected, the Color of the area surrounding the name of

the sensor and the photo of the sensor at the right on the Home

Screen will match the color of the sensor itself used for testing.

Page 7 of 16

July 1, 2013