Electrolux EFA90245X Manual do utilizador - Página 11
Procurar online ou descarregar pdf Manual do utilizador para Campânula de ventilação Electrolux EFA90245X. Electrolux EFA90245X 21 páginas. Electrolux cooker hood
Também para Electrolux EFA90245X: Manual de instalação (16 páginas), Manual de instalação (16 páginas)
It is dangerous to alter the specifications or attempt to modify this product in any way.
Technical Information
DIMENSIONS
ELECTRICAL SUPPLY:
The symbol
on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be
handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office,
your household waste disposal service or the shop where you purchased the product.
This appliance must be earthed
Electrical Requirements
Any permanent electrical installation must
comply with the latest I.E.E. Regulations and
local Electricity Board regulations. For your own
safety this should be undertaken by a qualified
electrician e.g. your local Electricity Board, or a
contractor who is on the roll of the National
Inspection Council for Electrical Installation
Contracting (NICEIC).
Electrical Connection
Before connecting to the mains supply ensure
that the mains voltage corresponds to the
voltage on the rating plate inside the cooker
hood.
INSTALLATION INSTRUCTIONS
HEIGHT OF CANOPY:
HEIGHT OF CHIMNEY:
WIDTH OF CANOPY :
DEPTH OF CANOPY:
VOLTAGE:
POWER CONSUMPTION:
FAN MOTOR:
LAMPS : (4 x 20 W)
Note: CE Marking certifies that this appliance complies with the requirements
laid down in EEC directive 89:336. (Electromagnetic compatibility) and subse-
quent modifications and Low Voltage directive 72/23/E.
ELECTRICAL CONNECTIONS
(UPPER SECTION) 415 mm
(LOWER SECTION) 700 mm
This appliance is fitted with a 3 core mains cable and
must be permanently connected to the electricity supply
via a double-pole switch having 3mm minimum contact
gap on each pole. A Switched Fuse Connection Unit to
BS1363 Part 4, fitted with a 3 Amp fuse, is a recom-
mended mains supply connection accessory to ensure
compliance with the Safety Requirements applicable to
fixed wiring instructions.
This appliance conforms to BS 800: 1988 and EEC
Directive No. 78 308 regarding suppression of radio and
television interference.
11
70 mm
898 mm
650 mm
220-240 V 50Hz
330 W
250 W
80 W