ANSITE AST-2008D2 Manual do utilizador - Página 5

Procurar online ou descarregar pdf Manual do utilizador para Sistema de segurança ANSITE AST-2008D2. ANSITE AST-2008D2 10 páginas.

Press key: four digit password (such as "1234" or other ) at first,then you press key "program",

then press key "4" . "

This function clear all settings but the user password, include pre-stored telephone numbers, all

settings will be stored to its initial settings as it manufactured out. This fuction is often useful to

diagnosis the "obstacles" which may be resulted by your wrong setting.

7.Alarm siren hooting time setting

Press key: four user digit password at first,then you press key:

"program"+"3"+"program"+ time(1~20minutes)+ "program"

siren hooting time when alarm taking place can be set to 1~20minutes its initial value is 1 minute.

8.Setting guard with delay option

Press key: four user digit password at first,then you press key:

"program"+"5"+"program"+ time(1~90seconds)+ "program"

setting guard with remote controllers or by pressing keypad will be valid after delay this option

time, its initial value is zero, no delay.

9.Setting alarm delay time

Press key: four user digit password at first,then you press key:

"program"+"6"+"program"+ time(1~90seconds)+ "program"

When the main set received alarm signal under guard state,it will waite a period of time

0~90seconds and then report alarm, the initial value is zero, no delay.

10.Open telephone line cut-off detect fuction

Press key: four user digit password (such as "1234" or other ) at first,then you press key

"program"+"7", this function will make the alarm system hooting when its telephone line cut off.

11.Close telephone line cut-off detect fuction

Press key: four user digit password (such as "1234" or other ) at first,then you press key

"program"+"8", this function will not make the alarm system hooting when its telephone line cut

off.

12.Modify user password

Press key: four digit user password (such as "1234" or other ) at first,then you press key

"program"+key"9"+key "program"+key "four digit new password"+key "program", the initial

user password settings is"1234",this user password must remember.If you forget this

password,you can press down the

beep sound,the password will restore to its initial settings "1234".

13.Modify network connection user ID code

Press key: four digit user password (such as "1234" or other ) at first,then you press key

"program"+key"0"+key "program"+key "four digit ID code"+key "program",

This four digit user ID code is used in network connection application when using an

administration computer to receive and process the alarm messages.

for ten seconds,you will hear a short beep and a long