ANSITE AST-2008D2 Manual do utilizador - Página 6

Procurar online ou descarregar pdf Manual do utilizador para Sistema de segurança ANSITE AST-2008D2. ANSITE AST-2008D2 10 páginas.

Receiving alarm messages and processing

When alarm broke out, the siren will resound as you selected, the system will automatically dial

out the pre-stored telephone numbers and send memo messages to the alarm callee

telephone.When you connected on your telephone to the alarm set and hear the pre-recorded

memo messages by the telephone, you can press the key on your telephone to process the alarm

messages as you need:

You can input the digital key on your callee telephone as follows,

Press key"1": set guard

Press key"2": withdraw guard

Press key"5": start up siren

Press key"6": shut off siren

Press key"7": open background monitor

Press key"8": close background monitor

Press key"9": withdraw guard and auto-dialer hook on

If you press key"7" on your callee telephone, you can monitor the sound given out around the

alarm set,but the moniter time is only lasted for 20 seconds when you press the key "7" one time.If

you want to continue listen to the sound around the ast-2008D alarm set,you have to press the

key"7" again on your callee telephone( alarm receive telephone ) not more than 20 seconds

interval.

If you don't withdraw guard when you received the alarm,the alarm set will dial the pre-stored

next group telephone numbers consecutively.

Pleaase remember, it will take 30 secondes time to play the pre-stored messages each time while

auto dial each group of alarm telephone.

INSTALLATION AND USE GUIDE

Telecommunication operation by telephone:

If you need to operate the alarm system far away, you can dial the alarm by any other telephone

far or near, after five times ringback sound, the alarm system will automatillay hook off and

prepare to process the command you give out from the caller telephone, you have to input four

digit telecommunication operation user password (its initial value is "1234", and you can modify

it by yourself) on your caller phone at first,then you can set the alarm system by input digit

number as command on the telephone you used:

Press"1": setting guard of the alarm system

Press"2": withdraw guard of the alarm system

Press"3": setting alarm with sound

Press"4": setting alarm with no sound

Press"5": startup the siren

Press"6": shut off the siren

Press"7": open backgroud sound monitor

Press"8": close backgroud sound monitor