Duratuf GS72 Manual de instruções de montagem - Página 14

Procurar online ou descarregar pdf Manual de instruções de montagem para Armazenamento ao ar livre Duratuf GS72. Duratuf GS72 16 páginas.

SECURING SHED

Secure your shed using Treated Timber Pegs or a Bolt Down Kit

TIMBER PEGS—WOODEN FLOOR

• The optional Duratuf Timber Peg Down Kit includes six H5 treated

timber pegs that can be hammered into the ground and then at-

tached to the Base Plate with stainless steel screws. A Guardian

timber floor can then be fitted on top of the Base Plate if required.

BOLT DOWN KIT—CONCRETE

• The optional Duratuf Bolt Down Kit includes 6 x galvanised

brackets, screws and dynabolts.

• Space the brackets evenly around the shed and fix to the Bottom

Plate and the concrete slab. A 10mm masonry drill bit is required.

FITTING A GUARDIAN FLOOR KIT (OPTIONAL)

• Position the Floor Joists centrally between the side

Base Plates and skew nail each end with two 75mm

nails.

• Check that the shed is sitting level and square . Check

that the diagonal Bottom Plate measurements are the

same. This ensures that the shed base is square.

• Place the Floor Boards in position. (You may need to

cut the last Floor Board to the correct width using a

Skill Saw.) Nail each Floor Board in, using two 50mm

nails each end and two nails into each floor joist.

BACK BASE PLATE

JOIST

FRONT BASE PLATE