ADE EHR1 Manual de instruções - Página 10

Procurar online ou descarregar pdf Manual de instruções para Balanças ADE EHR1. ADE EHR1 20 páginas. Platform scale

Counting function

There are two options to come into counting mode.

Counting mode can be enabled in order of step 1 – 3 – 4 – 5 (reference quantity will be load

before activating counting function) or in order of step 2 – 3 – 4 – 5 (reference quantity will be

load after activating counting function) as described in the following.

1. (1) Be sure that scale is in normal weighing mode, the scale is empty and scale shows

0 and the scale is stable. Place the sample at the weighing platform and press button

„U" (Units) for 3 seconds to come into counting mode.

(2) When „SPL.--" appears, counting mode is active. Press button „T" (Tare) to confirm.

To leave counting mode press button ON/OFF/

mode.

2. (1) Be sure that scale is in normal weighing mode, the scale is empty and scale shows

0 and the scale is stable. Press button „U" (Units) for 3 seconds to come into counting

mode.

(2) When „SPL.--" appears, counting mode is active. Place the sample at the weighing

platform and press button „T" (Tare) to confirm.

To leave counting mode press button ON/OFF/

mode.

3. As long as in display „--" flashes, scale is detecting the reference weight. When scale

has found a stable net weight higher than 0, display shows „00000" and the first digit is

flashing.

4. Enter the number of parts of reference weight. For changing the flashing digit press

button „U" (Units). Confirm the value at each digit with „T" (Tare).

If the unit weight, which is defined by reference weight and entered number of parts, is

higher than 0.5d, the display shows the entered number and is now in counting mode.

If more parts are put on the weighing platform, display now shows the total quantity of

the parts.

If the unit weight, which is defined by reference weight and entered number of parts, is

lower than 0.5d, display shows „SPL.Er" and the scale returns to enter the number of

parts. Increase the reference quantity.

5. To leave counting mode press button „U" (Units) for 3 seconds. The scale returns in

weighing mode.

. The scale returns in weighing

EHR_EHQ-210517-Rev009-UM-en