Aus Electronics Direct HDEX0021M1 Manual do utilizador - Página 4

Procurar online ou descarregar pdf Manual do utilizador para Extensor Aus Electronics Direct HDEX0021M1. Aus Electronics Direct HDEX0021M1 8 páginas. 200m hdmi wireless extender

Imprimir página
Power indicator
POWER:
System status indicator
STATUS:
HDMI: HDMI input/output status indicator
Wireless channel switch key
CHANNEL:
Rate selector switch
HIGH-LOW:
IR OUT&RESET:
Insert IR receiver cable & Factory Reset Button
IR IN&RESET:
OPERATIONG AND CONNECTION:
1.
Connect one HDMI cable from the DVD/BD player into the HDMI input port of
the HDMI wireless TX.
2.
Connect one HDMI cable from TV/Monitor into the HDMI output port of the
HDMI wireless RX.
3.
Connect the IR Transmitter cable to the HDMI wireless TX and the IR
Transmitter cable must face to the control target device.
Connect IR Receiver cable to the HDMI wireless RX.
4.
5.
Connect 5V power supplies to the TX&RX, the POWER indicator will be lit at
this moment.
6.
The device will automatically connect after power on. The STATUS indicator
of TX and RX will be lit when the connection is successful. If the HDMI input or
output signal is normal, the HDMI indicator light will be lit also. The STATUS
indicator flashes continuously during normal transmission.
7 In the case of multiple RX, all RX are connected in the same way.
Insert IR transmitter cable & Factory Reset Button
FIG.5 connection diagram
HDMI IN: HDMI INPUT
HDMI OUT: HDMI OUTPUT
DC5V: 5V DC in jack
4