Great Lakes MINISTAR S Manual de operação - Página 11
Procurar online ou descarregar pdf Manual de operação para Equipamento dentário Great Lakes MINISTAR S. Great Lakes MINISTAR S 13 páginas.
Também para Great Lakes MINISTAR S: Dicas de resolução de problemas e fabrico (2 páginas)
Imprimir página
A
C
11
B
D
Position a 125mm diameter round disc on the spring-
loaded adjusting ring of the pressure chamber.
Align the clamping frame over the material so that the
spring clips slip under the bevel of the locking device
(white arrow) on the sides of the chamber.
Tighten by turning the handle clockwise, so that
the chamber and clamping handles are parallel
(white arrow).
2.) Barcode Scan:
The
Barcode Scanner
automatically enters the
correct processing information for your material.
Scan
Press the
portion of the
(A) to activate the scanner.
For Great Lakes Material:
on an easy-to-scan
Barcode Strip
box of material. Hold the barcode strip under the
scanner until you hear a "beep" indicating the
barcode has been read. The heating time will
automatically show on the display (C).
For Scheu Material:
the barcode is printed
Material
directly on the
(D). Hold the material
under the scanner until you hear a "beep"
indicating the barcode has been read. The heating
time will automatically show on the display (C).
Code/Scan Button
the barcode is located
(B) inside each