AFG 13.0AT Manual do utilizador - Página 8

Procurar online ou descarregar pdf Manual do utilizador para Passadeira de corrida AFG 13.0AT. AFG 13.0AT 20 páginas.
Também para AFG 13.0AT: Manual do utilizador (19 páginas)

Imprimir página

ii ¸ _/

13.0AT

Rev.l.7.indd

14-15

TENSIONING

TIlERUNNING BELT

The running belt has been properly adjusted at the

factory before it was shipped. At times the belt can

move off-center during shipment,

CAUTION: Running belt should NOT be moving during

tensbning.

Over-tightening

the running

belt

can

cause excessive wear on the treadmifl as weft as its

components, Never over-tighten the belt,

If you can feel a slipping sensation when running on the

treadmill, the runnfi7g belt must be tightened, In most

cases, the belt has stretched from use, causing the

belt to slip. This is a normal and common adjustment,

To eliminate this slipping, TURN THE TREADMILLOFF

and tension BOTH THE REAR ROLLER BOLTSusing the

supplied Allen wrench, turning them 1/4 TURN to the

right as shown. Turn the treadmill on and check for

slipping. Repeat if necessary, but NEVER TURN the

roller bolts more than 1/4 turn at a time. Belt is properly

tensioned when the slipping sensation is gone,

Belt istoo far to the right side

Beltis too far to the left side

CENTERING TIlERUNNING BELT

Therunning belt has been properly adjusted at the

factory before it was shipped. At times the belt can

move off-center during shipment. Before operating the

treadmill, make sure the belt is centered and remains

centered to maintain smooth operation,

CAUTION:Do not run belt faster than 1/2 rnph while

centering, Keep fingers, hair and clothing away from

belt at all times,

If the running tier is too far to the right side:

With the treadmill running at 1/2 mph, turn the right

adjustment bolt clockwise 1/4 TURN at a time (using

the supplied Aden wrench). Check the belt alignment.

Allow belt to run a furl cycle to gauge if more adjustment

is needed, Repeat if necessary, until the belt remains

centered during use,

If the running belt is too far to the left side:

With the treadmill running at 1/2 mph, turn the right

adjustment bolt counter-clockwise 1/4 TURNat a time

(using the supplied Allen wrench). Check the belt

alignment, Allow belt to run a furl cycle to gauge if more

adjustment is needed, Repeat if necessary, until the

belt remains centered during use,

& CAUTION_

aa:aa :::::::::::::: [ aa.aaj

_)XEAR:RA:E

(_CALORIES

®..........®

_,WARNING_

Note: Thereis a thin protective sheet of clear plastic on the overlay of the console and should be removed,

WORKOUT PROFILE DISPLAK. Displays workoutprofiles.

B) ADDITIONAL DISPLAY WINDOWS: Time,Incline,Distance,Speed,Heart Rateand Cabries.

C) CLOCK/DATE WINDOW: Displayseither Clockor Date.

D) START.. Simplypress to begin exercisingor starts your workout.

E) STOP: P ress topause/endyour workout.Holdfor 3 secondsto reset the treadmill.

PROGRAMMING BUTTON: Usedto select Program,Leveland Time,and other options. Pressto changedisplay feedback

during workout.

G) INCLINE ARROW KEY$:Pressto adjust incline (+/- 0.57/oo increments).

H) SPEED ARROW KEYS: P ressto adjust speed (+/- O.1MPHincrements).

PROFILE rM BUTTON: Usedto scrod throughproFILE :M display modes.

QUICK ADIUST KEYPAD: Usedto reachdesiredspeedor incline morequickly.

K) AUDIOIN (NOT SHOWN): Plug your CD/ MP3player into the consoleusin_ the included audio adaptor cable.

AUDIOOUT/ HEADPHONE IACK (NOT SHOWN): Plugyour headphonesinto this jack to listen toyour music through the

headphones.

4/1/08

3:41:09