Dynaphos CraftLine GS-300 Manual de instruções - Página 4
Procurar online ou descarregar pdf Manual de instruções para Flash da câmara Dynaphos CraftLine GS-300. Dynaphos CraftLine GS-300 8 páginas. Studio flash
Imprimir páginaMounting the flash and preparing to work
Mount the flash unit onto an appropriate light stand and fix it. Adjust the horizontal angle and
secure the handle.
To take down the protective cap or mounted accessory, hold down the mount release button (pic.
1), turn the accessory counterclockwise and pull it forward. To mount an accessory, proceed the opposite
way as matching the feathers of the bayonet with the corresponding holes of the flashe body. Please notice,
that to installe the modeling lamp, first you need to unmount the glass cover dome.
To work with photographic umbrella use the standard 18 cm reflector included in the kit and place
it with the umbrella outfit matching the flash umbrella holder (pic. 3). The umbrella is fixed by the corre-
sponding screw in the flash body and you need to apply moderate effort to tighten it.
Make sure that the power switch
the AC power socket 13. Plug in the power cable and turn on the flash by placing the power switch in position
"I". Make a test flash as pressing the "Test" button 6.
(check page 2)
9.
pic. 1
3
is in "0" position and place the power cable in
pic. 2
Guide
pic. 3