Autopage RF-503 Manual de instruções - Página 2

Procurar online ou descarregar pdf Manual de instruções para Alarme para automóvel Autopage RF-503. Autopage RF-503 16 páginas. Remote transmitters
Também para Autopage RF-503: Manual (2 páginas)

Imprimir página

RF-503 OPERATION INSTRUCTIONS

A. REMOTE CONTROL TRANSMITTER OPERATION

The remote control transmitters (XT-57) included with the RF-503 offer the code rolling feature

which will prevent illegal use of a code-grabber with an attempt to record the code of your

transmitter.

In addition to normal ON/OFF alarm operation, the unique four button transmitter allows you to

"customize" certain alarm functions from the transmitter for your particular vehicle, or for

changing conditions, such as traffic, the environment, etc. The transmitter has three buttons

marked, I, II, & III, and referred to in this manual as Button I, II, and III, plus a smaller button

marked "M". This button indicates MODE and will be explained wherever it becomes

necessary to use it throughout this manual.

1. ARM/DISARM

TO ARM THE RF-503

Press Button I once to arm. The vehicle

horn, or siren (*) will chirp one (1) time,

the parking lights will flash one (1) time, and

all doors will lock (**).

TO DISARM THE RF503

Press Button I once to disarm.

The vehicle horn, or siren (*)

will chirp two (2) times,

the parking lights will flash two (2)

times, and the doors will unlock (**).

NOTE (*): The RF-503 is capable of two methods for audible alarm trigger. You may choose

at the time of installation to honk the vehicle's horn, you may choose the standard electronic

siren, or both.

NOTE (**): Your vehicle must be equipped with power door locks. Optional relays may be

required. Please read the manual for other door lock functions and/or options that may be

controlled by the RF-503.

III