Airetool EIC-625-750 Manual de operação e serviço - Página 12
Procurar online ou descarregar pdf Manual de operação e serviço para Ferramenta eléctrica Airetool EIC-625-750. Airetool EIC-625-750 16 páginas. Tube cutters
Imprimir páginaTOOL BIT REPLACEMENT INSTRUCTIONS
FOR AIRETOOL TUBE CUTTER MODELS: EIC, PIC & TIC
NOTE : THESE INSTRUCTIONS PERFORMED WITH ASSEMBLY
"BB" ATTACHED TO THE LEVER HOUSING (MODELS EIC & TIC)
OR SPRING HOUSING (MODEL PIC).
1. REMOVE ASSEMBLY "AA" BY TURNING THE CUTTER
BODY COUNTERCLOCKWISE THEN TURN THE
MANDREL TIP COUNTERCLOCKWISE.
2. REMOVE THE PILOT(TURN COUNTERCLOCKWISE)
AND REPLACE TOOL BITS.
3. REPLACE PILOT ON THE
CUTTER BODY.
4. MOVE THE MANDREL EXTENSION FORWARD BY
PUSHING FORWARD ON THE (LEVER ON EIC & TIC)
(MANDREL DRIVER ON PIC).
5. THREAD THE MANDREL TIP INTO THE MANDREL
EXTENSION AND THE CUTTER BODY INTO THE CUTTER
BODY EXTENSION CLOCKWISE UNTIL SNUG. (IF
MANDREL EXTENSION UNTHREADS AT LEVER
OR MANDREL DRIVER, SIMPLY THREAD
THIS MANDREL ASSEMBLY INTO THE
LEVER OR MANDREL DRIVER).
Page - 12