Airetool EIC-625-750 운영 및 서비스 매뉴얼 - 페이지 12

{카테고리_이름} Airetool EIC-625-750에 대한 운영 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Airetool EIC-625-750 16 페이지. Tube cutters

TOOL BIT REPLACEMENT INSTRUCTIONS

FOR AIRETOOL TUBE CUTTER MODELS: EIC, PIC & TIC

NOTE : THESE INSTRUCTIONS PERFORMED WITH ASSEMBLY

"BB" ATTACHED TO THE LEVER HOUSING (MODELS EIC & TIC)

OR SPRING HOUSING (MODEL PIC).

1. REMOVE ASSEMBLY "AA" BY TURNING THE CUTTER

BODY COUNTERCLOCKWISE THEN TURN THE

MANDREL TIP COUNTERCLOCKWISE.

2. REMOVE THE PILOT(TURN COUNTERCLOCKWISE)

AND REPLACE TOOL BITS.

3. REPLACE PILOT ON THE

CUTTER BODY.

4. MOVE THE MANDREL EXTENSION FORWARD BY

PUSHING FORWARD ON THE (LEVER ON EIC & TIC)

(MANDREL DRIVER ON PIC).

5. THREAD THE MANDREL TIP INTO THE MANDREL

EXTENSION AND THE CUTTER BODY INTO THE CUTTER

BODY EXTENSION CLOCKWISE UNTIL SNUG. (IF

MANDREL EXTENSION UNTHREADS AT LEVER

OR MANDREL DRIVER, SIMPLY THREAD

THIS MANDREL ASSEMBLY INTO THE

LEVER OR MANDREL DRIVER).

Page - 12