Airetool EIC-625-750 Kullanım ve Servis Kılavuzu - Sayfa 12

Elektrikli Alet Airetool EIC-625-750 için çevrimiçi göz atın veya pdf Kullanım ve Servis Kılavuzu indirin. Airetool EIC-625-750 16 sayfaları. Tube cutters

Sayfayı Yazdır

TOOL BIT REPLACEMENT INSTRUCTIONS

FOR AIRETOOL TUBE CUTTER MODELS: EIC, PIC & TIC

NOTE : THESE INSTRUCTIONS PERFORMED WITH ASSEMBLY

"BB" ATTACHED TO THE LEVER HOUSING (MODELS EIC & TIC)

OR SPRING HOUSING (MODEL PIC).

1. REMOVE ASSEMBLY "AA" BY TURNING THE CUTTER

BODY COUNTERCLOCKWISE THEN TURN THE

MANDREL TIP COUNTERCLOCKWISE.

2. REMOVE THE PILOT(TURN COUNTERCLOCKWISE)

AND REPLACE TOOL BITS.

3. REPLACE PILOT ON THE

CUTTER BODY.

4. MOVE THE MANDREL EXTENSION FORWARD BY

PUSHING FORWARD ON THE (LEVER ON EIC & TIC)

(MANDREL DRIVER ON PIC).

5. THREAD THE MANDREL TIP INTO THE MANDREL

EXTENSION AND THE CUTTER BODY INTO THE CUTTER

BODY EXTENSION CLOCKWISE UNTIL SNUG. (IF

MANDREL EXTENSION UNTHREADS AT LEVER

OR MANDREL DRIVER, SIMPLY THREAD

THIS MANDREL ASSEMBLY INTO THE

LEVER OR MANDREL DRIVER).

Page - 12