Gamma 5003 Manual do Proprietário - Página 7
Procurar online ou descarregar pdf Manual do Proprietário para Máquinas de encordoar Gamma 5003. Gamma 5003 20 páginas. 6 point mounting
Também para Gamma 5003: Manual do Proprietário (20 páginas), Manual do Proprietário (19 páginas), Manual do Proprietário (20 páginas)
Imprimir página
ASSEMBLY INSTRUCTIONS
Turntable and Mounting System In-
stallation
To install the turntable remove the four nuts
underneath holding the mounting bolts in
place. Align the bolts with the holes in the
turntable pin. Secure them with the included
allen wrech.
NOTE: Applying the turntable brake will make
it easier to align the bolts and holes.
Locking the Turntable
The turntable may be locked in any position.
The turntable winged lock knob is packed
separately. Install the lock knob into the
threaded hole located on the side of the
tensioner bar post.
Rotate the knob clockwise to lock the turn-
table, and counter-clockwise to release the
turntable.
Installing the Tensioner
Remove the button head screw and washer
located at the end of the tensioner bar with
the 3 mm hex wrench provided. Slide the
tensioner onto the bar, being careful to align
the bar with all of the bearings and the drive
gear with the gear track. Replace the button
head screw and washer in the end of the
tensioner bar.
6