Gamma 5003 소유자 매뉴얼 - 페이지 7
{카테고리_이름} Gamma 5003에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma 5003 20 페이지. 6 point mounting
Gamma 5003에 대해서도 마찬가지입니다: 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (19 페이지), 소유자 매뉴얼 (20 페이지)
페이지 인쇄
ASSEMBLY INSTRUCTIONS
Turntable and Mounting System In-
stallation
To install the turntable remove the four nuts
underneath holding the mounting bolts in
place. Align the bolts with the holes in the
turntable pin. Secure them with the included
allen wrech.
NOTE: Applying the turntable brake will make
it easier to align the bolts and holes.
Locking the Turntable
The turntable may be locked in any position.
The turntable winged lock knob is packed
separately. Install the lock knob into the
threaded hole located on the side of the
tensioner bar post.
Rotate the knob clockwise to lock the turn-
table, and counter-clockwise to release the
turntable.
Installing the Tensioner
Remove the button head screw and washer
located at the end of the tensioner bar with
the 3 mm hex wrench provided. Slide the
tensioner onto the bar, being careful to align
the bar with all of the bearings and the drive
gear with the gear track. Replace the button
head screw and washer in the end of the
tensioner bar.
6