- ページ 7

ストリング・マシン Gamma 5003のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Gamma 5003 20 ページ。 6 point mounting
Gamma 5003 にも：オーナーズマニュアル (20 ページ), オーナーズマニュアル (19 ページ), オーナーズマニュアル (20 ページ)

ASSEMBLY INSTRUCTIONS

Turntable and Mounting System In-

stallation

To install the turntable remove the four nuts

underneath holding the mounting bolts in

place. Align the bolts with the holes in the

turntable pin. Secure them with the included

allen wrech.

NOTE: Applying the turntable brake will make

it easier to align the bolts and holes.

Locking the Turntable

The turntable may be locked in any position.

The turntable winged lock knob is packed

separately. Install the lock knob into the

threaded hole located on the side of the

tensioner bar post.

Rotate the knob clockwise to lock the turn-

table, and counter-clockwise to release the

turntable.

Installing the Tensioner

Remove the button head screw and washer

located at the end of the tensioner bar with

the 3 mm hex wrench provided. Slide the

tensioner onto the bar, being careful to align

the bar with all of the bearings and the drive

gear with the gear track. Replace the button

head screw and washer in the end of the

tensioner bar.