Garmin GPSMAP 8700 Manual de instruções de instalação - Página 4
Procurar online ou descarregar pdf Manual de instruções de instalação para Sistema GPS marítimo Garmin GPSMAP 8700. Garmin GPSMAP 8700 27 páginas.
Também para Garmin GPSMAP 8700: Manual de instruções de instalação (6 páginas), Manual de instruções de instalação (8 páginas)
![Garmin GPSMAP 8700 Manual de instruções de instalação](/uploads/products/server2/2323828/2323828.jpg)
Connecting to Power
When connecting the power cable, do not remove the in-line fuse holder. To prevent the possibility of injury or
product damage caused by fire or overheating, the appropriate fuse must be in place as indicated in the product
specifications. In addition, connecting the power cable without the appropriate fuse in place voids the product
warranty.
You should connect the red wire to the power source through the ignition or another manual switch to turn the
device on and off.
1 Route the power cable between the power source and the device.
2 Connect the red power wire to the ignition or another manual switch, and connect the switch to the positive
(+) battery terminal if necessary.
3 Connect the black wire to the negative (-) battery terminal or to ground.
4 Connect the power cable to the device, and turn the locking ring clockwise to tighten it.
Additional Grounding Consideration
This device should not need additional chassis grounding in most installation situations. If you experience
interference, you can use the grounding screw on the housing to connect the device to the water ground of the
boat to help avoid the interference.
Power Cable Extensions
If necessary, the power cable can be extended using the appropriate wire gauge for the length of the extension.
Splice
• Up to 4.6 m (15 ft.): 10 AWG (5.26 mm
• Up to 7 m (23 ft.): 8 AWG (8.36 mm
• Up to 11 m (36 ft.): 6 AWG (13.29 mm
Fuse (10 A, 42 V fast-acting)
20.3 cm (8 in.)
Battery
20.3 cm (8 in.)
11 m (36 ft.) maximum extension
4
WARNING
2
) extension wire
2
) extension wire
2
) extension wire