Fujitsu PRIMERGY TX300 S3 Manual do suplemento de serviço - Página 23

Procurar online ou descarregar pdf Manual do suplemento de serviço para Servidor Fujitsu PRIMERGY TX300 S3. Fujitsu PRIMERGY TX300 S3 47 páginas.

Replacement routines

Ê Plug the power cables on the Xn connectors of the new Power backplane

(see also

chapter

Xn connector

Ê Install the PS safe guard and fasten it with one screw.

Ê Reinstall the hot-plug power supply unit(s).

Ê Close the server and connect all power plugs (for a detailed description see

the Options Guide).

4.5

Replacing the SAS/SATA backplane

As spare part the SAS/SATA backplane is already mounted in the SAS/SATA

backplane holder.

Ê Open the server as described in the

Ê Remove all the hot-plug hard disk drives (for a description see the Operating

Manual).

CAUTION!

Check if all hard disk drives are uniquely identified so that you can

reinsert them into their original bays.

TX300 S3

"Appendix",

section "Power backplane" on page

Cable designation

T26139-Y3758-V8 / SNP:A3C40057456-R

T26139-Y3952-V1 / SNP:A3C40064985

T26139-Y3952-V11 / SNP:A3C40064987

Service Supplement

Replacing the SAS/SATA backplane

section "Preparation" on page

39):

17.