Fujitsu Eternus DX200F Manual de operação - Página 33

Procurar online ou descarregar pdf Manual de operação para Armazenamento Fujitsu Eternus DX200F. Fujitsu Eternus DX200F 48 páginas. Hybrid storage systems, all-flash arrays, power synchronized unit
Também para Fujitsu Eternus DX200F: Manual de configuração (10 páginas), Manual de configuração (28 páginas), Manual de configuração (13 páginas), Manual de configuração (16 páginas), Manual de configuração (38 páginas), Precauções de segurança (12 páginas)

Chapter 4

Maintaining Optional Products

4.2

Adding Servers

(3)

Swing the lock lever in the direction of the arrow, until the lock clicks shut.

(4)

Check that the newly installed drive's DRIVE READY LED lights up green.

To install more additional drives, repeat

If a wrist strap is used, remove the wrist strap.

In the [Drives] screen of [Component] on the ETERNUS Web GUI screen, check that the added drives

have been recognized.

Set up RAID groups, volumes, hot spares, and host affinity settings, as required.

4.2

Adding Servers

To connect a new server to ETERNUS DX, preparation is required.

4.2.1

Create RAID groups in order to create volumes to be used by the added server.

If free space in an existing RAID group is used, this procedure can be omitted.

The procedure to register a RAID group is as follows:

Click the [RAID Group] tab on the navigation of the ETERNUS Web GUI screen.

The [RAID Groups] screen appears.

•

Hold the drive with both hands to protect against jarring.

FUJITSU Storage ETERNUS DX200F All Flash Array Operation Guide (Basic)

Lock lever

Step 3

and

Step

P3AM-8472-01ENZ0