Aqua Creek Products LIBERTY LIFT Instruções de instalação, montagem e funcionamento para o instalador - Página 7

Procurar online ou descarregar pdf Instruções de instalação, montagem e funcionamento para o instalador para Equipamento de iluminação Aqua Creek Products LIBERTY LIFT. Aqua Creek Products LIBERTY LIFT 15 páginas.

OPERATING INSTRUCTIONS – LIBERTY Lift
NOTE: CHECK ALL NUTS & BOLTS FOR TIGHTNESS AND FOR WORN PARTS
BEFORE EACH USE
The Liberty Lift
TM
transfer into the chair or roll onto the platform.
NOTE: It is extremely important to cycle the Liberty Lift all the way to the maximum
down and up position each time the lift is used. This will keep the two actuators
synchronized to operate in harmony keeping the platform level at all times. This is
accomplished by taking the hand held controller and applying continuous pressure to the
button on the controller until the lift stops itself in either the up or down position.
Once the platform is level with the pool deck (fully up position) then lower the tailgate
ramp to the pool deck using the ramp control lever (See Photo 1). Once a patron has
entered the platform, then raise the tailgate ramp to the full up position before starting
the lift cycling into the pool.
********************************************************************
IMPORTANT NOTE: Failure to lift the tailgate ramp to the full up position prior to
cycling the lift may result is serious damage to your lift and/or impair the movement of
********************************************************************
DO NOT transfer onto the platform if the control box issues a warning tone on the 24v
battery. If the control box beeps a tone, this means the battery is low.
Remove the battery from the lift and place it on the wall mount charger until the battery
is fully charged before resuming use of the lift.
You are now seated comfortably on the Liberty Lift
s p a . B e f o r e y o u b e g i n t h e l i f t ' s o p e r a t i n g c y c l e , t a k e a v i s u a l c h e c k o f t h e d e c k a r e a a n d
pool area to ensure a clear operating path.
should always be in the deck position before a user attempts to
Photo 1
the platform.
TM
, and ready to move into the pool or
TM
7