BilJax Pro-Jax Utility Scaffold Instruções de montagem
Procurar online ou descarregar pdf Instruções de montagem para Equipamento industrial BilJax Pro-Jax Utility Scaffold. BilJax Pro-Jax Utility Scaffold 4 páginas. Building a one frame high scaffold
Imprimir página
BUILDING A ONE FRAME HIGH SCAFFOLD
For proper assembly, your basic Pro-Jax Utility Scaffold
must be comprised of 13 individual parts (plus guard
rail panels when required).
Letter
A
End Frame
B
Side Brace
C
Platform
D
5" Caster
E
2" Snap Pin
—
STEP ONE
Attach side brace B to two end frames A by
following this sequence:
®
-
Pull Saf-T-Lok
pin at each end of side brace to the
disengaged position. (see decal)
-
While holding lock pin in disengaged position, place U-
Channel on each end of side brace B around leg of end
frame A at desired platform height.
-
Release lock pin and be sure that pin fully engages into
hole in end frame leg.
-
Push in and rotate Saf-T-Lok
shaped end clears the brace locking pin support bracket
as shown (LOCKED).
-
To release, push in and rotate Saf-T-Lok
U-shaped end unseats from around the brace locking pin
support bracket as shown (UNLOCKED).
—
STEP TWO
Attach second side brace B to both end frames A following the same Step One
sequence.
• Both side braces must be positioned at the same height on the frames so that platform is
level.
• Be sure all 4 Saf-T-Lok
• Be sure all 4 Saf-T-Loks are in the locked position.
ASSEMBLY INSTRUCTIONS
Part
Qty.
2
2
1
4
4
®
counter clockwise until U-
WARNING
®
pins are fully engaged in holes of end frames.
B
A
®
clockwise until
- Page 4 -
C
E
D
L
WARNING
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN
PLATFORM COLLAPSE CAUSING SERIOUS INJURY OR DEATH.
1. Check to be sure brace locking pin is fully
engaged into frame leg.
2. Push in and rotate Saf-T-Lok
counter
TM
clockwise until U-shaped end clears the
brace locking pin support bracket as
shown (LOCKED).
3. To release, push in and rotate Saf-T-Lok
TM
ENGAGED
DISENGAGED
clockwise until U-shaped end unseats from
around the brace locking pin support
Work position
Do not use in this position
CTO
Patents Pending
bracket as shown (UNLOCKED).
© Bil-Jax, Inc. 2004
0202-0506
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN
L
WARNING
PLATFORM COLLAPSE CAUSING SERIOUS INJURY OR DEATH.
1. Check to be sure brace locking pin is fully
engaged into frame leg.
2. Push in and rotate Saf-T-Lok
TM
counter
clockwise until U-shaped end clears the
brace locking pin support bracket as
shown (LOCKED).
3. To release, push in and rotate Saf-T-Lok
TM
ENGAGED
DISENGAGED
clockwise until U-shaped end unseats from
around the brace locking pin support
Work position
Do not use in this position
CTO
Patents Pending
bracket as shown (UNLOCKED).
© Bil-Jax, Inc. 2004
0202-0506
A
B