DG UDP10G-IP Manual de configuração - Página 10
Procurar online ou descarregar pdf Manual de configuração para Placa-mãe DG UDP10G-IP. DG UDP10G-IP 18 páginas. Fpga setup with cpu demo
Imprimir páginadg_toeudp10gip_fpgasetup_intel.doc
7) Open NiosII command shell.
a. Type "nios2-terminal" to run the console.
b. Input '0' to initialize TOE10G-IP/UDP10G-IP in client mode (asking PC MAC address
by sending ARP request).
c. Default parameter in client mode is displayed on the console.
If Ethernet connection has the problem and the status is linked down, the error message
is displayed on the console instead of welcome message, as shown in Figure 1-11.
26-Aug-20
Figure 1-9 Run NiosII terminal
Figure 1-10 Message after system boot-up
Figure 1-11 Error message when cable is linked down
Page 10