Dell PowerEdge 2650 Manual de instruções - Página 5

Procurar online ou descarregar pdf Manual de instruções para Servidor Dell PowerEdge 2650. Dell PowerEdge 2650 8 páginas. Activating the integrated raid controller
Também para Dell PowerEdge 2650: Manual de instalação (26 páginas), Manual de instalação (32 páginas), Atualização da informação (14 páginas), Manual de instalação (20 páginas), Manual de instalação (40 páginas), Manual de substituição (28 páginas), Manual (42 páginas), Manual (15 páginas), Manual (42 páginas)

Imprimir página
Dell PowerEdge 2650 Manual de instruções
To construct the DC input power cable, perform the following steps:
Strip the insulation from the ends of the six DC power wires, exposing approximately
1
4.5 mm (0.175 inches) of copper wire.
Using a hand-crimping tool, crimp a connector contact to each DC power wire.
2
Slide a piece of heat-shrink tubing over the DC power cable.
3
The heat-shrink tubing should be approximately 3.175 cm (1.25 inches) in length.
Insert the three black –48 VDC wires into connector housing positions 2, 3, and 6 (see
4
Figure 1-1 and Table 1-1).
Insert the three red –48 VDC return wires into connector housing positions 1, 4, and 5
5
(see Figure 1-1 and Table 1-1).
Slide the heat-shrink tubing over the DC power cable so that it overlaps the connector
6
housing by at least 6.35 mm (0.25 inches).
Using a heat gun, shrink the tubing around the cable and connector housing.
7
F i g u r e 1 - 1 .
C o n n e c t o r H o u s i n g
Ta b l e 1 - 1 .
C o n n e c t o r H o u s i n g P i n A s s i g n m e n t s
Pin
Description
1
–48 VDC return
2
–48 VDC
3
–48 VDC
4
–48 VDC return
5
–48 VDC return
6
–48 VDC
front view
6
5
4
Wire Color and Size
Red 16 AWG
Black 16 AWG
Black 16 AWG
Red 16 AWG
Red 16 AWG
Black 16 AWG
3
2
1
Cabling Instr uct ions fo r t he –48 V D C
1-3