ABB ACH580-01 Series Manual de instruções - Página 4

Procurar online ou descarregar pdf Manual de instruções para Equipamento industrial ABB ACH580-01 Series. ABB ACH580-01 Series 7 páginas. Base drive replacement
Também para ABB ACH580-01 Series: Manual (16 páginas), Manual de instalação rápida e de arranque (17 páginas), Manual de instruções (8 páginas), Manual de instalação rápida e de arranque (17 páginas), Manual de instalação rápida e de arranque (17 páginas)

REPLACEMENT INSTRUCTIONS | ACH580-01 VXR UL TYPE 1 , R2/R3/R4

Step

Instruction

Using a T30 bit, loosen the two (2) bottom M6 screws securing the

drive, four (4) turns of the screw.

NOTE: Do not remove the screw completely. Only loosen enough to

be able to lift the drive off the screws.

Using a T30 bit, loosen and remove the top two (2) M6 screws

securing the drive.

Carefully lift the drive out of channel.

Unpack the replacement drive.

R2 Frame: Remove drive cover by pushing up on the sides as

indicated by arrow.

R3 & R4 Frame: Using a T20 bit, loosen and remove one (1) M4x16

screws securing the inverter cover.

NOTE: If the drive conduit plate is not reusable, DO NOT remove the

conduit plate on the replacement drive.

Remove knockouts from the conduit assembly.

Install Romex into conduit plate to protect the wires.

R2 Frame: Using a T20 bit, loosen and remove two (2) M4x8 screws.

Remove conduit assembly.

R3 Frame: Using a T20 bit, loosen and remove two (2) M4x16

screws. Remove conduit assembly.

R4 Frame: Using a T25 bit, loosen and remove four (4) M5x25

screws. Remove conduit assembly.

Recycle the conduit assembly and hardware.

Diagram